|
FIE Computerised Brinell Hardness
Tester, Model B 3000-PC-FA is
fabricators from steel plates and is
designed for precise loading
systems. It is fully automatic
machine for production testing,.
Once the job is placed on testing
table and a push button for
operation cycle is pressed, the job
is raised and swiveled and brought
in contact with claming device. Then
indentor is swivelled and brought in
vertical loading position .
The loading operation starts. After
preset dwelling timer, unloading
operation starts. As soon as load is
fully removed, the indentor is
swivelled and the image is
digitalized using a CCD camera
fitted on machine and captured by
PC. The diameters of identation are
measured by PC and the Brinell
Hardness is displayed on monitor
with the help of “State of Art
Technology” software. The job is
lowered down and here the auto cycle
is over.
Optionally the machine can be
operated after a lapse of interval
without operation of push button, so
that operator has only to loading
and unloading of job on machine.
This tester is designed for
measuring hardness of metallic parts
with wide testing range from soft to
hard and its accurate results are
widely acclaimed. This tester
conforms to IS:2281, BS:10003-2 and
ASTM E-10.
FEATURES
-
Fully automatic machine for
production testing.
-
Full computerised (PC based)
Brinell Hardness tester.
-
Direct and accurate measurement
Brinell hardness number using “
State of Art” image processing
technology.
-
Wide testing range: From soft
metal such as lead up to
hardest, like tempered steel.
-
High accuracy & repeatability of
measurement at all loads.
-
Advanced Window 95/98/NT
based software:
• Latest GUI features with user
friendly software.
• On line indentation setting
and focusing on PC monitor.
• Advances image processing :
Algorithms implemented for
precise calculations
of hardness numbers with
various options to cover all
ranges of specimen.
• Batch file processing : Option
for data / storage and reports
generation.
• Statistical Evaluation :
Software for calculating
standard deviation, mean,
medium,
frequency distribution graph,
variation graph etc.
• Calibrating mode facility.
• Extendibility for feature
advanced image processing
analysis, requirements.
• “ Auto measurement start “
from machine.
SCOPE OF SUPPLY :
-
Basic machine with CCD camera,
optics with illumination systems
and connecting cable.
-
PCI video capture card with
driver software.
-
PC and windows operating system
is to by produced by customer.
|
