FIE
Computerised Brinell Hardness
Tester, Model B 3000-PC-FA is
fabricators from steel plates
and is designed for precise loading systems. It is fully automatic machine
for production
testing,. Once the job is placed on testing table and a push button for
operation cycle is
pressed, the job is raised and swiveled and brought in contact with
claming device. Then
indentor is swivelled and brought in vertical loading position .
The loading operation starts. After preset dwelling timer, unloading
operation starts. As soon
as load is fully removed, the indentor is swivelled and the image is
digitalized using a CCD
camera fitted on machine and captured by PC. The diameters of identation
are measured by
PC and the Brinell Hardness is displayed on monitor with the help of
“State of Art Technology”
software. The job is lowered down and here the auto cycle is over.
Optionally the machine can be operated after a lapse of interval without
operation of push
button, so that operator has only to loading and unloading of job on
machine.
This tester is designed for measuring hardness of metallic parts with wide
testing range from
soft to hard and its accurate results are widely acclaimed. This tester
conforms to IS:2281,
BS:10003-2 and ASTM E-10.
FEATURES
-
Fully automatic machine for
production testing.
-
Full computerised (PC based)
Brinell Hardness tester.
-
Direct and accurate
measurement Brinell hardness
number using “ State of Art”
image processing technology.
-
Wide testing range: From
soft metal such as lead up
to hardest, like tempered
steel.
-
High accuracy &
repeatability of measurement
at all loads.
-
Advanced Window 95/98/NT
based software:
• Latest GUI features with
user friendly software.
• On line indentation
setting and focusing on PC
monitor.
• Advances image processing
: Algorithms implemented for
precise calculations
of hardness numbers with
various options to cover all
ranges of specimen.
• Batch file processing :
Option for data / storage
and reports generation.
• Statistical Evaluation :
Software for calculating
standard deviation, mean,
medium,
frequency distribution
graph, variation graph etc.
• Calibrating mode facility.
• Extendibility for feature
advanced image processing
analysis, requirements.
• “ Auto measurement start “
from machine.
SCOPE OF SUPPLY :
-
Basic machine with CCD
camera, optics with
illumination systems and
connecting cable.
-
PCI video capture card with
driver software.
-
PC and windows operating
system is to by produced by
customer.
|
|
Technical
Data
|
|
Load range |
250 to 3000 kgf in
steps of 2580 kgf. |
|
Max test height |
380 mm |
|
Depth of throat |
200 mm |
|
Machine height (
approx ) |
1185 mm |
|
Net weight ( approx
) |
450 kgs |
|
Drive power |
0.66 HP |
|
Mains supply |
415 V, 50 Hz, 3
Phase |
Measuring accuracy
with CCD camera
and built in optics |
0.01 mm |
|
Dwell timer |
1 to 99 sec. |
|
Raising / lowering |
240 mm/min |
|
|
|
|
Standard
Accessories
|
|
Testing Table 200 mm |
1 No. |
|
Testing Table 70 mm |
1 No. |
|
Ball Holder 5 mm |
1 No. |
|
Ball Holder 10 mm |
1 No. |
|
Test block HB 5/750 |
1 No. |
|
Test block HB
10/3000 |
1 No. |
|
Telescopic cover for
elevating screw
protection |
1 Set |
|
Instruction Manual |
1 No. |
|
|
|
